|
|
House Renovations
Topic has 4 replies.
  
|
|
Sort Posts:
|
|
|
|
 15/05/2008, 12:48
|
Geranium
Joined on 23/08/2004
Posts 110
|
|
|
We need to replace our window handles but are looking for the old style ones with the bar that runs the whole verticle length of the window and turning the handle in the middle either puts the bar into place at top and bottom of the frame or releases it.
The trouble is I can't find such a thing at Mr Bricolage nor on the Leroy Merlin or Castorma websites. Does anyone know what these are called and have they been spotted anywhere?
Now whether anyone has any bright ideas as to how to remove the old broken ones that have been there for a couple of hundred years is another question. Yep, I've put the paint stripper on...
|
|
|
|
|
Report
|
|
|
|
|
15/05/2008, 12:56
|
Clair
 
Joined on 23/08/2004
------- Forum Moderator ------- Lot
Posts 6,254
|
|
|
|
I think you're referring to what is called crémone.
You can see some here: (type cremone in the search field): http://www.lapeyre.fr/, where they are available either with a long handle (crémone à béquille) or with a short handle (crémone à bouton).
Clair, a Real Virtual French Person
La vérité est si obscurcie en ce temps et le mensonge si établi, qu'à moins d'aimer la vérité, on ne saurait la reconnaître. (Blaise Pascal)
|
|
|
|
|
Report
|
|
|
|
|
15/05/2008, 14:06
|
Gluestick
Joined on 22/03/2006
UK and Nord Pas de Calais
Posts 2,342
|
![Smile [:)]](/cs/images/emotions/smile.gif)
Re: Funny window handles
|
|
|
|
|
|
|
Same as mine.
They are in fact quite simple. In the middle of the window, on the opening edge, opposite where the handle goes in to the window (the handles are normally retained by two woodscrews through the escutcheon plate. Release these two screws and the handle comes out. You will then see that it is just like a door handle; square section mild steel bar.
If you then look on the edge of the window moulding (the bit that is lost to view when closed) you will see one or two metal plates, recessed into the moulding.
Removing this/these should provide access to the internal workings.
All they in fact are, are one or two bell cranks (i.e. small levers sitting at circa 90 degrees to the two rods, that are inserted into the window, top and bottom).
Next remove the cover plates (if any) top and bottom of the window and diagnose the problem.
It will usually be with the bell crank/s.
"Yes, but that apart, Mrs Lincoln, did you enjoy the play?"
Gluestick
|
|
|
|
|
Report
|
|
|
|
|
16/05/2008, 0:33
|
thunderhorse
Joined on 16/11/2005
Deux-Sèvres
Posts 179
|
|
|
|
I don't know where you are, but if you have a Weldom/Gitem outlet, you'll find what you want in there.
Roads? Where we're going we don't need roads.
|
|
|
|
|
Report
|
|
|
|
|
17/05/2008, 17:42
|
tracteurtom
Joined on 09/01/2007
19 Correze
Posts 314
|
|
|
|
You can generally find these things in Brocantes and Vide Greniers, but finding 2 the same is tricky.
Lapere stock them as noted above, but be careful as there are 2 types, one is a working version as per the original design, the other is simply an ornament, to fit no doubt to a new window to make it look old - bizarre !
|
|
|
|
|
Report
|
|
|
|
|
France Forum » Building and Re... » House Renovatio... » Re: Funny window handles
|
|
|
|