|
|
French Satellite TV, French Internet and Telephone
Topic has 7 replies.
 
 
|
|
Sort Posts:
|
|
|
|
12/05/2008, 7:42
|
joidevie
Joined on 10/05/2005
Posts 178
|
19VATCH 19VATCA 17VATPCH500 - Satellite cable spec? The best one?
|
|
|
|
|
Hi all.. I'm about to re-wire my sat setup in order to ensure the best possible signal (I'm right on the edge of the satellite footprint in the South)
I'm trying to make sense of French specifications on cable and the best possible available.. 17db, 19db?? VATCH? VATCA? VATPCH? Can anyone help? There are a number available here for reference. Are gold connectors worth the extra, or should I invest in a crimping tool to make the joins to the plugs?
Many thanks!
|
|
|
|
|
Report
|
|
|
|
12/05/2008, 11:17
|
Anton Redman
Joined on 23/08/2004
Gironde
Posts 1,921
|
Re: 19VATCH 19VATCA 17VATPCH500 - Satellite cable spec? The best one?
|
|
|
|
|
|
17 , 19 or 21 decibel indicates the signal loss for every 100 metres of cable at a frequency of 800 Mhz. Lower is better and you need ideally 17 db. PATCA is exterior grade - more expensive a metre but more resistant to UV breakdown. VATCA interior use only.
Minimise your joints by having the cable come through the wall will a flying lead long enough to reach the digibox or numerique receiver. If you have any choice where the dish goes minimise the length of the cable runs.
The 'F' type connector which you need to for the LNB and the digibox/NR does not need to gold. You strip enough of the two sleevs so that the inner copper plugs directly into the two sockets. You also need good contact to the outer coax because this is how the digibox/NR sends instructions to the LNB. Might be worth buying a special wire striper for the co ax but a sharp knife and a steady hand will do the job. I do not think a crimp tool works with F type connectors ?
I would not buy over the internet except from a Satellite specialist
|
|
|
|
|
Report
|
|
|
|
13/05/2008, 7:15
|
joidevie
Joined on 10/05/2005
Posts 178
|
Re: 19VATCH 19VATCA 17VATPCH500 - Satellite cable spec? The best one?
|
|
|
|
|
Thanks Anton - great answer.. I have now since ordered some CT125 made from the UK - Apparently the 'best' brand available. I will also be losing the connectors I have in the old setup and will reduce the run to 25m.. Let's hope this all helps..
|
|
|
|
|
Report
|
|
|
|
13/05/2008, 18:31
|
J.R's gone native
Joined on 16/07/2006
Picardie, Sussex
Posts 1,695
|
Re: 19VATCH 19VATCA 17VATPCH500 - Satellite cable spec? The best one?
|
|
|
|
|
|
Ernie
Who sells the F connectors for sattelite cable? (CPC perhaps?)
I am still fudging around drilling out the centre pin of BNC CCTV crimp connectors and would love to find a crimp connector that works with the core and outside diameters of sat cable.
|
|
|
|
|
Report
|
|
|
|
19/05/2008, 23:31
|
ChezShells

Joined on 23/08/2004
Posts 490
|
Re: 19VATCH 19VATCA 17VATPCH500 - Satellite cable spec? The best one?
|
|
|
|
|
|
|
|
|
France Forum » Living » French Satellit... » 19VATCH 19VATCA 17VATPCH500 - Satellite cable spec? The best one?
|
|
|
|