French Satellite TV, French Internet and Telephone

Topic has 17 replies.

Print Search
Sort Posts:    
   27/03/2008, 17:40
joidevie is not online. Last active: 21/08/2008 05:49:52 joidevie

Not Ranked
Joined on 10/05/2005
Posts 230
How to wire one of these ? Picture included...
Reply Quote
I'm trying to work out how this is wired up ?



I'm less interested in the ethernet part of it, but really the TV and SAT coaxial.. I have 2 lengths of coax coming into the box - one for the TV and one for the SAT. I can only see one hole for the centre core of the coax and that's on the SAT side ? Also, it seems all the 'outer' braided part of both incoming coaxes gets sandwiched into the same bit ? Sorry, I'm normally quite clever but this one's caught me out !

Many thanks...

   Report 
   27/03/2008, 17:56
clarksinfrance is not online. Last active: 27/07/2008 08:33:44 clarksinfrance

Not Ranked
Joined on 28/05/2006
56 Baud
Posts 101
Re: How to wire one of these ? Picture included...
Reply Quote
You need another box, which collects the signals from the TV aerial, Sattelite Dish. Then you need run one coaxial cable from the collector to the box shown. The Ethernet cable is run separately (I think)

   Report 
   27/03/2008, 18:06
Quillan is not online. Last active: 07/09/2008 09:52:23 Quillan



Top 25 Posts
Joined on 23/08/2004
Forum Moderator
Posts 3,644
Re: How to wire one of these ? Picture included...
Reply Quote
I think the 'Ethernet' connector may really be a RJ11 socket for a phone.
http://www.chambresdhote.com

   Report 
   27/03/2008, 18:28
joidevie is not online. Last active: 21/08/2008 05:49:52 joidevie

Not Ranked
Joined on 10/05/2005
Posts 230
Re: How to wire one of these ? Picture included...
Reply Quote
 clarksinfrance wrote:
You need another box, which collects the signals from the TV aerial, Sattelite Dish. Then you need run one coaxial cable from the collector to the box shown. The Ethernet cable is run separately (I think)

.. How boring - I was really just hoping for a simple distribution box. Yet another bad purchase.. Why would you want to go through another box before the distribution terminal here ?

   Report 
   27/03/2008, 21:32
Breton Networks is not online. Last active: 12/06/2008 18:47:03 Breton Networks

Not Ranked
Joined on 05/08/2007
Posts 69
Re: How to wire one of these ? Picture included...
Reply Quote
.
   Report 
   27/03/2008, 23:07
microwave mike is not online. Last active: 21/07/2007 08:43:28 microwave mike

Not Ranked
Joined on 21/07/2007
Posts 11
Re: How to wire one of these ? Picture included...
Reply Quote

 joidevie wrote:
 
 
 I have 2 lengths of coax coming into the box - one for the TV and one for the SAT. 

That's your mistake. You should only have one coax coming into the box and that coax carries a combined satellite and TV signal. The satellite signal and TV signal are usually combined up on the chimney and the one coax lead then feeds the wall plate that you show in the image.


   Report 
   27/03/2008, 23:33
Gyn_Paul is not online. Last active: 01/09/2008 08:58:32 Gyn_Paul

Top 150 Posts
Joined on 23/08/2004
La Creuse - God's own Dept.
Posts 1,203
Re: How to wire one of these ? Picture included...
Reply Quote

 Quillan wrote:
I think the 'Ethernet' connector may really be a RJ11 socket for a phone.


I don't want to be picky Quillan, but I think it's actually an RJ45: the new phone outlet standard. Which is all well and good if the appropriate leads to go between it and the phone or modem/router are available widely. As yet I haven't seen any sign of them.

I hope this box pictured below by the o/p is not the way things are going in future. I much prefer having separate feeds for aerial and dish: the use of this (combining at the head-end) implies that a dish is always going to be on a roof with the aerial. That's a big no-no as far as I'm concerned. I don't mind walking round the end of the barn to brush the snow off the dish, but shinning up an icy roof to do it is definately not on.
And another thing... Who (apart from someone with a new SKY contract) wants a phone socket by the TV? Barmy !

p



"Don't think of them as problems, think of them as opportunities."
"OK, I think I've hit an insurmountable opportunity!"
   Report 
   28/03/2008, 5:20
joidevie is not online. Last active: 21/08/2008 05:49:52 joidevie

Not Ranked
Joined on 10/05/2005
Posts 230
Re: How to wire one of these ? Picture included...
Reply Quote
Ah - I see.. Any clues as to what this box is ? A link perhaps ? I can still get up there and add one !

Many thanks..

   Report 
   28/03/2008, 6:54
Nick Trollope is not online. Last active: 04/09/2008 21:28:36 Nick Trollope



Top 50 Posts
Joined on 23/08/2004
Broons, Dept 22
Posts 2,479
Re: How to wire one of these ? Picture included...
Reply Quote

 Gyn_Paul wrote:


I don't want to be picky Quillan, but I think it's actually an RJ45: the new phone outlet standard.

I'm sure it is an RJ11, too. Not enough connections for a RJ45 (which has 8). RJ45 is indeed the new standard for telephone in France, but I'd say that socket is American?

OP; Your "system" should include a combiner for the TV and satellite signals. This can be as simple as a "passive" box (a small metal thing with 3 "F" connectors on it, or as comples as a multi-output satellite "switch". Where did you get the socket?

 


 

Nick

www.aplaceinfrance.com
   Report 
  Page 1 of 2 (18 items) 1 2 >
France Forum » Living » French Satellit... » How to wire one of these ? Picture included...

Powered by Community Server, by Telligent Systems

Please note that any unsolicited advertising will be removed